I have a cisco 1941 router just configured but no matter how I go about configuring the telnet, it seems not to work.
It has interfaces already set up and systems can browse through it in the office. It has two interfaces WAN and LAN configured with Ip Addresses and the LAN interface with other sub interfaces with IP address configured on them.
I have tried setting up the terminal with the command as stated below but it is not working.
Router(config)#line vty 0 ?
<1-1370> Last Line Number
Router(config-line)#line vty 0 1370
Router(config-line)# password P@$$W)RD
Router(config-line)# login
I even tried using the following configuration but yet not working
Router(config)#line vty 0 4
Router(config-line)# password P@$$W)RD
Router(config-line)# login
Everytime I try to connect to the any of the subinterfaces through telnet or the WAN address through telnet, I get the error message
MacBook-Pro:~ User$ telnet x.x.x.x
Trying x.x.x.x...
telnet: connect to address x.x.x.1x Connection refused
telnet: Unable to connect to remote host
Please what am I getting wrong here?