Timeline for Call is disconnected after huntstopped to another phone
Current License: CC BY-SA 3.0
12 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Dec 8, 2016 at 17:12 | comment | added | gh0st | Haha I completely understand and appreciate your honesty! Kind of why I think the question has got so little attention is because there's not a lot of people who handle VoIP and those who do get paid a lot to do it. I will try a method of deduction. Thank you! | |
| Dec 8, 2016 at 17:09 | comment | added | Ronnie Smith | Man, to be honest, I'd fix this for money but I don't get no joy doing this. I did this stuff 10 years ago... Good luck. Try and remove all but 2 dn's from the hunt - start minimal, fix that, then add more. Double check codec is same for all phones and vm and gateways. | |
| Dec 8, 2016 at 17:04 | comment | added | gh0st | A question upvote would be greatly appreciated to help get more attention. | |
| Dec 8, 2016 at 3:08 | comment | added | gh0st |
Actually that cause disconnect code is apparently no use. But after a closer look line 130-133 also stick out but with a different cause code: cc_api_call_disconnected: Cause Value=19, Interface=0x48177AB0, Call Id=1907.
|
|
| Dec 8, 2016 at 2:28 | comment | added | gh0st |
I used debug void ccapi inout and term mon and pasted the results of making the two calls here: pastebin.com/guqD6PAz What stands out for me is line 1003-1005 where 1005 specifically reads Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0).
|
|
| Dec 6, 2016 at 23:47 | comment | added | Ronnie Smith |
Might not be it, just threw it out there for 50 brownie points. Use ccapi inout debug with term mon to figure it out if that don't fix it. Or, just follow the directions on Cisco Unified Communications Manager Express System Administrator Guide's Call Coverage Features chapter. Your analog lines are PLARing to x2000. What you want it so configure "Call Hunt".
|
|
| Dec 6, 2016 at 23:41 | comment | added | Ronnie Smith | Shared- Line Overlays Dual-line ephone-dns can also use overlays. The configuration parameters are the same as for single-line ephone-dns, except that the huntstop channel command must be used to keep calls from hunting to the ephone-dn’s second channel. | |
| Dec 6, 2016 at 20:09 | comment | added | gh0st | Could you explain how this is supposed to resolve the issue? | |
| Dec 6, 2016 at 18:13 | review | Low quality posts | |||
| Dec 6, 2016 at 19:13 | |||||
| Dec 6, 2016 at 18:01 | comment | added | Ronnie Smith |
ephone-dn 2 dual-line
|
|
| Dec 6, 2016 at 17:59 | comment | added | gh0st | ephone-dn 6? I see it there. | |
| Dec 6, 2016 at 17:56 | history | answered | Ronnie Smith | CC BY-SA 3.0 |