Timeline for vPC traffic flow question
Current License: CC BY-SA 3.0
17 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Mar 1, 2018 at 16:55 | history | edited | Bub | CC BY-SA 3.0 |
added 43 characters in body
|
| Mar 1, 2018 at 16:50 | comment | added | Bub | I misunderstood the scenario. You can use a double sided vPC with inter lock links. | |
| Feb 27, 2018 at 19:00 | comment | added | Satish | i don't know based on what you proposing L3 cable between two A1 and A2 ? | |
| Feb 27, 2018 at 8:12 | comment | added | Bub | A 40G L3 link between the aggregation switches instead of cross links. | |
| Feb 26, 2018 at 12:11 | comment | added | Satish | Tell me how do I configure ECMP in my senecio? | |
| Feb 26, 2018 at 9:12 | comment | added | Bub | Why would you want to extend your L2? Why not make them routed links and let the routing protocol do ECMP. | |
| Feb 23, 2018 at 16:41 | comment | added | Satish |
This is what i am planning to do, if i add 40G link between C1 and A2, and similar C2 to A1 and create vPC between them then it will act link single link and that will solve my problem, am i right?
|
|
| Feb 23, 2018 at 5:48 | comment | added | Bub | Also, do you have L3 peering between the Agg devices? | |
| Feb 23, 2018 at 5:47 | comment | added | Bub | Can you elaborate your edit? You say that there is a routing loop. I don’t see any routing loop. Packet from agg-2 will load balance your traffic depending on the configuration. | |
| Feb 22, 2018 at 21:04 | comment | added | Satish | I have updated my question and seeking more details | |
| Feb 22, 2018 at 11:52 | comment | added | Bub | Have you got the answer for your question? | |
| Feb 22, 2018 at 6:58 | comment | added | Bub | Okay. Then it is alright. | |
| Feb 21, 2018 at 19:09 | comment | added | Satish | i have lots of 40G ports available so i used that one :) | |
| Feb 21, 2018 at 17:42 | comment | added | Bub | you don't have to use a 40G between the aggregation switches for peer link. You can reduce the capacity to say 20G. hope it helps. | |
| Feb 21, 2018 at 15:57 | comment | added | Satish | Using 40G between aggr switches to Create vPC between two switch and i have L2 network between Aggr and access layer. This topology look like spine-leaf but its really not true spine-leaf | |
| Feb 21, 2018 at 9:19 | review | First posts | |||
| Feb 21, 2018 at 13:01 | |||||
| Feb 21, 2018 at 9:16 | history | answered | Bub | CC BY-SA 3.0 |