In the following topology my main purpose is to:
1)PC11 ping Router(R)
2)PC11 ping PC13
ESW10:
In gig0/3 has the no switchport command and a given IP address.
In gig0/2 it has the switchport access VLAN 10 command.
In gig0/0 it has a given IP and the no switchport command.
In gi0/1 has switchport access VLAN 10 command.
PC11 can ping PC9
R can ping ESW10
ESW10 can ping ESW11.
So my question is what do I need to add and where in order for PC11 and PC9 to ping R and eventually PC13
Device Configs:
ROUTER
interface GigabitEthernet0/0
ip address 192.168.2.1 255.255.255.0
duplex full
interface GigabitEtherneto/1
ip address 192.168.3.1 255.255.255.0
duplex auto
ESW10
interface GigabitEthernet0/0
no switchport
ip address 192.168.1.1 255.255.255.0
negotiation auto
interface GigabitEthernet0/1
switchport access vlan 10
switchport mode access
negotiation auto
interface GigabitEthernet0/2
switchport access vlan 10
switchport mode access
negotiation auto
interface GigabitEthernet0/3
no switchport
ip address 192.168.2.2 255.255.255.0
negotiation auto
ESW11
interface GigabitEthernet0/0
no switchport
ip address 192.168.1.2 255.255.255.0
negotiation auto
interface GigabitEthernet0/1
switchport access vlan 10
switchport mode access
negotiation auto
interface GigabitEtherneto/2
switchport access vlan 10
switchport mode access
negotiation auto
