Return to Question

With these approaches I'm pretty sure that Profinet devices will work on non industrial Cisco switches when these devices are directly hooked to the same switch. I need to make it work with Profinet devices spanning trough different switches.

With these approaches I'm pretty sure that Profinet devices will work on non industrial Cisco switches when these devices are directly hooked to the same switch. I need to make it work with Profinet devices connected to an Industrial Siemens Switch which is connected to a Cisco switch.

Im still not able to ping the PLC even allowing VLAN 0 through the voice VLAN and Trunking. I dont know where to check if the Cisco Cisco is actually dropping traffic

Im still not able to ping the PLC even allowing VLAN 0 through the voice VLAN and Trunking. I don't know where to check if the Cisco switch is actually dropping traffic. I've checked debug arp and so far see no issue

Has anyone encountered a similar issue with the SCALANCE X108 or could provide guidance on what might be wrong? Any specific configurations or checks I should perform on the SCALANCE X108 to ensure VLAN 101 traffic is passing through correctly?

Has anyone encountered a similar issue or could provide guidance on what might be wrong? Any specific configurations or checks I should perform on the Cisco C2960 to ensure Profinet traffic is passing through correctly?