I am a little new to this but here is what I am hoping to achieve. I have an Adtran TA908e that I am managing as an ISP router. I am hoping to create a vLan to be able to attach it to my LAN for management purposes. Here is what I have done so far, but the LAN vLan does not work.
! interface eth 0/1 description Publicly Routable LAN encapsulation 802.1q no shutdown ! interface eth 0/1.1 description Publicly Routable LAN vlan-id 1 native ip address 184.108.40.206 255.255.255.248 no shutdown interface eth 0/1.100 vlan-id 100 ip address 172.31.9.244 255.255.255.0 no shutdown ! interface eth 0/2 description WAN ip address 220.127.116.11 255.255.255.252 no shutdown !
eth 0/1.1 is publicly routable and I already have two devices using .186 and .187 functioning. They are attached to an 8 port unmanaged switch attached to eth 0/1. I have another cable from that unmanaged switch to one of the switches on my LAN. That's why I setup the vlan-id 100 on eth 0/1.100 to match the vlan on my LAN. I cannot access the Adtran router through the 172.31.9.244.
This Adtran is there to route the traffic from the public range of IP's that the ISP gave me to there equipment. This is working exactly as it should. What I need is a way to manage the Adtran from my LAN. Any help or recommendations would be greatly appreciated.