I've got a shiny new 4500E running 15.0(1r)SG7 that is set to replace an ailing 3750E. It is running ipbase for now.
On the 3750 I was able to check out the incoming DSCP/CoS values on interfaces using the
sh mls qos int gigX/X/X statistics.
I can't seem to find any releveant commands to show the same info on this platform.
Looking at the config documents here: Configuring Quality of Service there seems to be much less visibility into the individual interface markings.
I would think it should have been displayed with a
sh qos int tenX/X/X but all that gives me is this:
SR-CORE-C4500X-32#sh qos int ten1/1/31 Operational Port Trust State: Trusted Trust device: none Default DSCP: 0 Default CoS: 0 Appliance trust: none