I have used the EIGRP protocol to connect the relevant networks but it will refuse to acknowledge the presence of the other network I shall write the map out with the relevant addresses:
Main Router - Switch 1 - Slave Router -(Connected to 4 Switches) - PC's
The IP addresses for these are.
The Slave Router contains 4 VLANS I shall post their IPs too:
Main Router: 172.16.1.41 255.255.255.252 Slave Router: 172.16.0.245 255.255.255.252 S.R VLAN1: 172.16.0.161/28 S.R VLAN2: 172.16.0.65/28 S.R VLAN3: 172.16.0.97/28 S.R VLAN4: 172.16.0.201/29
The VLAN connections are then connected to PC's but their IPs should be assumed so I will not post anything about the PCs.
I have managed to get the Slave network connecting too and from each other but when I try and ping the slave router to the main router there is no signal.
I have tried to use EIGRP protocol on both networks.
eigrp 1 network 172.16.0.0 network 172.16.1.0 no auto-summary end
The commands used on both routers and still no connection.
Any suggestions would be helpful as in my mind they should have recognised each other and therefore be able to ping from one end to the other.