Here is the setup I have 2 networks.
1st one (this one is our old one and it is working great.)
ip address 10.22.227.X
subnet mask 255.255.255.0
2nd one (this is our new network that is not working right)
ip address 10.22.226.X
subnet mask 255.255.255.0
I can ping 10.22.227.131 from the 226 network but i can not ping 10.22.226.66 from the 227 network. (226.66 is my laptop 227.131 is my pc) I can see the files on the 227 computer seams as thought i have directional network.... I also have no internet on the 226 network.
Here is the running config file from the router that connects the 226 and the 227 network together.
Router#show running-conf Building configuration... Current configuration : 894 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! enable secret 5 $1$ngyI$dZN2sb5gHUYC2A37wLRQM1 enable password united2315 ! no aaa new-model ! resource policy ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ip subnet-zero ip cef ! ! ! ! ! ! ! ! interface FastEthernet0/0 description 0/0 10.22.227.254 ip address 10.22.227.253 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/1 description 0/1 10.22.226.254 ip address 10.22.226.254 255.255.255.0 duplex auto speed auto ! no ip classless ip route 10.22.226.0 255.255.255.0 10.22.227.254 ip route 10.22.227.0 255.255.255.0 10.22.227.254 ! no ip http server ! ! control-plane ! ! line con 0 line aux 0 line vty 0 password cisco login line vty 1 4 login ! end
The 227 network is managed by another company they have provided me with this info.....
ip route 188.8.131.52 255.255.255.255 10.22.227.253 name TEST-TO-CLIENT-ROUTER <=-- Added a test route ip route 10.22.226.0 255.255.255.0 10.22.227.253 name CLIENT-NETWORK <=-- Added a route to the clients device s1.pryor# s1.pryor#ping 10.22.227.253 <=-- I can Ping to the Clients device Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.22.227.253, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/9 ms s1.pryor# s1.pryor#sho ip arp 10.22.227.253 Protocol Address Age (min) Hardware Addr Type Interface Internet 10.22.227.253 1 0023.33e8.5c96 ARPA Vlan1 <=-- Got an ARP and MAC address for the Clients device s1.pryor# s1.pryor#ping 184.108.40.206 <=-- Can not ping pass the Clients Device Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 220.127.116.11, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) s1.pryor-chv.robertsautoctr ================================ The routes in place I was able to Ping to the clients device but not pass it They will re-configure their router and call us back Our routes in place
What am i doing wrong that i dont have internet and local network? they told me they have routed the internet over to our 226 network all ready as well...
See screen shot for network setup