After booting the device, "=>" sign is showing in Juniper SRX 100 router please support. We are trying hard to restore the OS, but still failed, kindly support us urgently.
-
This means that the device is in U-boot mode. what happens when you type in 'boot'? – Ricke912 Feb 3 '16 at 10:46
-
Did any answer help you? If so, you should accept the answer so that the question doesn't keep popping up forever, looking for an answer. Alternatively, you could provide and accept your own answer. – Ron Maupin♦ Aug 13 '17 at 5:43
Add a comment
|
Please review this article, hopefully it will help you:
From u-boot:
=> setenv ipaddr 10.157.70.170
=> setenv netmask 255.255.255.0
=> setenv gatewayip 10.157.64.1
=> setenv serverip 10.157.60.1
=> saveenv
Reboot into the loader:
Loader>install tftp://10.77.25.12/junos-srxsme-10.0R2-domestic.tgz
(Of course, use network settings relevant to your environment, and an image filename that you posses.)
