I would like to get ARP tables from a switch to a syslog-ng server that has been set up on Ubuntu Server 12.04 LTS. I have read about SNMP and I know the server will act as a manager and the switch as an agent. I have details as to where the MIB is contained, and I must use the command

snmpwalk -v2c -c <community> <SwitchIP> .

I want the resulting arp tables to be directed to a my server.

My problem is that I don't know where exactly to run the command, or save the output to a file.

  • Hi, adding information to a database is off-topic... Super User is a good place to ask if you need help modifying a database. If you don't mind deleting that portion of the question, we can reopen it. – Mike Pennington Aug 21 '13 at 8:25
  • I have modified my question – sosytee Aug 21 '13 at 8:31
  • What do you mean by "place the ARP tables into the server"? – Mike Pennington Aug 21 '13 at 8:34
  • The Arp tables will be generated by the switch, but i want them viewed from the server – sosytee Aug 21 '13 at 8:37
  • What if we told you how to put them in a text file... is that ok? – Mike Pennington Aug 21 '13 at 8:39
up vote 35 down vote accepted

There seems to be a little confusion... you are asking about ARP tables, and you're using OID .; however, that OID actually is for the mac-address table in the switch.

I am assuming you know how to login to your Ubuntu server, and that NET-SNMP is installed... please let me know if you need pointers for doing this (see this question for hints about loading MIBs in linux). Some of my examples assume you have the MIBs loaded on your server... you just need to remove the -m <mib-name> option in the commands if you don't have the MIBs loaded locally.

I apologize in advance for the length of this answer... I wish polling with SNMP wasn't as complicated...

Polling the mac-address table:

If you really want the mac-address table from the switch, then remember you have to change the community string you poll with... it should be in the form of <commity@vlan>... each vlan you poll needs a different community.

In my example below, the switch at is configured with snmp-server community public ro, and I'm polling the mac-address table in vlan-10 with dot1dTpFdbPort from BRIDGE-MIB.

[mpenning@tsunami ~]$ snmpbulkwalk -v 2c -c public@10 -OXsq \
dot1dTpFdbPort[0:6:53:fe:39:e0] 52
dot1dTpFdbPort[0:1d:a1:cd:53:46] 52
dot1dTpFdbPort[0:30:1b:bc:a7:d7] 52
dot1dTpFdbPort[0:80:c8:0:0:0] 52
dot1dTpFdbPort[38:ea:a7:6d:2e:8e] 52
dot1dTpFdbPort[80:ee:73:2f:b:40] 52
[mpenning@tsunami ~]$

In the output above, 52 is the value of dot1dBasePort, which is a number the MIB uses to index the dot1dTp table. To translate that into a normal interface name, you have to map that to an ifName... BRIDGE-MIB does that with dot1dBasePortIfIndex...

[mpenning@tsunami ~]$ snmpbulkwalk -v 2c -c public@10 -m BRIDGE-MIB \
BRIDGE-MIB::dot1dBasePortIfIndex.52 = INTEGER: 10048
[mpenning@tsunami ~]$
[mpenning@tsunami ~]$ snmpget -v 2c -c public ifName.10048
IF-MIB::ifName.10048 = STRING: Fa0/48
[mpenning@tsunami ~]$

Thus we know that all the mac-addresses on this switch were learned through FastEthernet 0/48 in vlan-10.

Polling the active Vlans:

If you're not sure which vlans to poll on a switch, you can get that information from ., which is vtpVlanState in the CISCO-VTP-MIB...

[mpenning@tsunami ~]$ snmpbulkwalk -v 2c -c public -OXsq -m CISCO-VTP-MIB \
vtpVlanState[1][1] operational
vtpVlanState[1][10] operational
vtpVlanState[1][1002] operational
vtpVlanState[1][1003] operational
vtpVlanState[1][1004] operational
vtpVlanState[1][1005] operational
[mpenning@tsunami ~]$

Keep in mind that Vlans 1002-1005 are internal Cisco Vlans that you should not poll.

Polling the ARP table

If you really want the ARP table from the switch, then you need to poll atPhysAddress...

[mpenning@tsunami ~]$ snmpbulkwalk -v 2c -c public -OXsq \
atPhysAddress[10][] "80 EE 73 2F 0B 40 "
atPhysAddress[10][] "38 EA A7 6D 2E 8E "
atPhysAddress[10][] "BC 51 FE 50 16 F8 "
atPhysAddress[10][] "00 06 53 FE 39 E0 "
atPhysAddress[10][] "00 18 BA 51 5B 41 "
[mpenning@tsunami ~]$

Saving command output to a file

We're delving into areas that go outside the normal scope of this site, but to save the ARP table above to a file in /tmp/S01_ARP.txt, the you'd add > /tmp/S01_ARP.txt to the end of the snmpbulkwalk above...

[mpenning@tsunami ~]$ snmpbulkwalk -v 2c -c public -OXsq \
      . > /tmp/S01_ARP.txt
[mpenning@tsunami ~]$ cat /tmp/S01_ARP.txt
atPhysAddress[10][] "80 EE 73 2F 0B 40 "
atPhysAddress[10][] "38 EA A7 6D 2E 8E "
atPhysAddress[10][] "BC 51 FE 50 16 F8 "
atPhysAddress[10][] "00 06 53 FE 39 E0 "
atPhysAddress[10][] "00 18 BA 51 5B 41 "
[mpenning@tsunami ~]$

As you see above, you can use cat in linux to get all output from a text file. NOTE: Some linux distributions (ahem... CentOS) clean out the /tmp directory on a monthly basis. You should use your HOME directory in linux to store the file. I don't remember Ubuntu cleaning out /tmp, but to be safe I'd avoid storing things there.

Miscellaneous notes about SNMP...

If you haven't loaded all Cisco's MIBs on your Ubuntu machine, then you should avoid using the -m <mib-name> flags in the snmpbulkwalk commands. Loading MIBs allows you to poll with an OID name, instead of the long dotted number...

Reference information:

I am including some show commands from the switch, in case you have questions about the CLI for the SNMP commands above...

S01#sh ver | i IOS
Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(37)SE, RELEASE SOFTWARE (fc2)
S01#sh mac address-table dynamic
          Mac Address Table

Vlan    Mac Address       Type        Ports
----    -----------       --------    -----
  10    0006.53fe.39e0    DYNAMIC     Fa0/48
  10    001d.a1cd.5346    DYNAMIC     Fa0/48
  10    0030.1bbc.a7d7    DYNAMIC     Fa0/48
  10    0080.c800.0000    DYNAMIC     Fa0/48
  10    38ea.a76d.2e8e    DYNAMIC     Fa0/48
  10    80ee.732f.0b40    DYNAMIC     Fa0/48
Total Mac Addresses for this criterion: 6
S01#sh arp
Protocol  Address          Age (min)  Hardware Addr   Type   Interface
Internet            -   0018.ba51.5b41  ARPA   Vlan10
Internet            0   0006.53fe.39e0  ARPA   Vlan10
Internet             0   bc51.fe50.16f8  ARPA   Vlan10
Internet             0   38ea.a76d.2e8e  ARPA   Vlan10
Internet              1   80ee.732f.0b40  ARPA   Vlan10
  • the answer was useful, i would like to know the meaning of -OXsq just before the ip adress – sosytee Aug 21 '13 at 12:16
  • 1
    check man snmpcmd if you're on a Linux host and have Net-SNMP installed. Otherwise you can find this information here: net-snmp.sourceforge.net/docs/man/snmpcmd.html – John Jensen Aug 21 '13 at 13:00
  • @MikePennington: Can you comment on the OIDs ipNetToMediaPhysAddress and ifPhysAddress? Specifically the semantic difference between these tables and atPhysAddress? – mormegil Nov 21 '14 at 20:48
  • In addition to the above, you can install netDB on that Ubuntu server and get more visibility on the ARP tables of several devices. netdbtracking.sourceforge.net – Kunal Feb 16 '15 at 21:57

protected by Community Sep 19 '17 at 17:55

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.