Weird. We just got a Brocade ADX 1000 for server load balancing. Config is setup to emulate the basic load balancer configuration in their guide (real servers, VIP and management IP are all members of the same subnet). Yet we can't ping or reach the VIP at all, with Layer 3. We can arping it to know that it's there.
Is this restricted by licensing (just found out the licenses are circa 2013 and 2014) or is there something wrong with our configuration? I would be grateful for any pointers.
Our basic configuration:
!
server real prod-web01 192.168.72.11
port http
port http keepalive
port http url "GET /status.html"
port ssl
port ssl keepalive
port ssl url "GET /status.html"
!
server real prod-web02 192.168.72.12
port http
port http keepalive
port http url "GET /status.html"
port ssl
port ssl keepalive
port ssl url "GET /status.html"
!
!
server virtual prod-webVIP 192.168.72.13
predictor round-robin
port http
port ssl sticky
bind http prod-web01 http prod-web02 http
bind ssl prod-web01 ssl prod-web02 ssl
!
vlan 1 name DEFAULT-VLAN by port
!
aaa authentication web-server default local
enable telnet authentication
enable super-user-password .....
no enable aaa console
hostname lb01
ip dns domain-name mng.dom
ip dns server-address 8.8.8.8 192.168.71.3 192.168.71.4 192.168.71.5
ip route 0.0.0.0 0.0.0.0 192.168.72.1
!
no telnet server
username admin password .....
no snmp-server enable traps locked-addr
no web-management ui-history-collect
!
interface management 1
ip address 192.168.72.253 255.255.255.0
!
interface ethernet 1
ip address 192.168.70.70 255.255.255.0
!
access-list 10 permit any
