I am very new to Cisco wireless. The most important settings on Cisco WLCs 5508 were done by external engineer. I have got an issue with wired guest network, my DHCP server (Cisco ASA Firewall) is not providing IP addresses to my guest clients connected over the cable,but wireless guests can get IP without any issue - wired and wireless guests are using the same scope on ASA. Please note that when I assign a static IP to a wired guest client, everything is fine, I am prompted to authenticate and then sufr on the internet. So I assume that tagging of the switch ports is alright. On my switches there are two VLANS for guests (vlan 94 for wired guests ; vlan 98 for both of them guests) On my WLC, I have got also two interfaces vlan 98 has got an IP address ; inteface with vlan identifier 94 does not have any IP, only "Guest Lan" option is checked. In my WLAN section is profile for wired guests where ingress interface is vlan 94 and egress interface is vlan 98 - So I think that vlan 94 for wired guests is only for like layer 2 purpose and then its bridged to vlan 98 on the WLC - Am I right ? In the attachment is debug log from Cisco WLC.
c8:5b:76:00:df:8d - is test client MAC. Can somebody suggest me what I should do to make DHCP for wired guests working or what troubleshooting steps should I try ? I can post some more detail if it will be necessary.