0

how can i take wired internet from the access point?enter image description here

  • Put a "dumb" switch between the link in the switch and the power injector, assuming no port-security, 802.1X or mac address filtering has been configured on the intelligent switch. – user36472 Jul 5 '17 at 8:51
  • i'm 90 meters away from the switch,i want from the access point – Kastan Pastan Jul 5 '17 at 8:58
  • Then i don't see much of a possibility unless you can disconnect the power injector and connect the wire from the AP directly to the switch and buy a PoE switch, connect that to the end of the AP wire and connect the AP to the PoE switch. – user36472 Jul 5 '17 at 9:02
  • can the second poe switch supply with power the access point? – Kastan Pastan Jul 5 '17 at 9:05
  • Of course there are plenty of small compact office switches with PoE capability. – user36472 Jul 5 '17 at 9:14
1

Disconnecting and adding a PoE capable compact switch at the AP location 90 meters from the switch could be a solution. Then connecting the AP to the compact switch which then will hold the uplink gives the possibility to add more hosts at the AP location. This solution is based on the fact, that no port-security, 802.1X or mac address filtering has been configured on the intelligent switch.

Diagram for your eyes: enter image description here

  • There are small switches that are powered by POE and let POE still go to your AP. You can find them on most sites.You may need your POE adapter to be POE plus (check the documentation that comes with your POE powered switch) but that's your best option if you don't want to run power to a switch local to the AP or another cable from your "main" switch. – Fixitrod Jul 6 '17 at 13:01
  • Sounds like something i would never use. – user36472 Jul 6 '17 at 13:03
  • Personally, I'd pull two cables and use the old one as a pull cord. Just offering an alternative option. – Fixitrod Jul 6 '17 at 13:04

Not the answer you're looking for? Browse other questions tagged or ask your own question.