I have a Cisco 881-W router with Cisco IOS C880 Version 12.4(24)T5.
For some reason I can't seem to get an IP on the Dialer. I'm probably doing something stupid wrong.
Interface IP-Address OK? Method Status Protocol Dialer1 unassigned YES NVRAM up up FastEthernet0 unassigned YES unset up down FastEthernet1 unassigned YES unset up down FastEthernet2 unassigned YES unset up down FastEthernet3 unassigned YES unset up down FastEthernet4 unassigned YES NVRAM up up NVI0 unassigned NO unset up up Vlan1 unassigned YES NVRAM up up Wlan-GigabitEthernet0 unassigned YES unset up up wlan-ap0 unassigned YES NVRAM up up interface fastEthernet0/0 no ip address duplex auto speed auto pppoe enable group global pppoe-client dial-pool-number 1 no cdp enable interface fastEthernet0/1 duplex auto speed auto no cdp enable interface Dialer0 ip address negotiated ip mtu 1492 ip flow ingress ip nat outside encapsulation ppp dialer pool 1 ppp authentication pap callin ppp pap sent-username --- password --- ppp ipcp dns request accept ppp ipcp route default ppp ipcp address accept no cdp enable