I am having an issue doing a simple VLAN configuration on a D-Link (DGS 1210) switch.
There is port 24 on the D-Link switch which is connected to a Cisco router. Which basically needs to be a Trunk as it will carry several VLANs. The configuration is as follows.
Router#sh run Building configuration... Current configuration : 1450 bytes ! version 15.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! ! no aaa new-model ! ! ip cef no ipv6 cef multilink bundle-name authenticated ! cts logging verbose ! ! license udi pid CISCO1941/K9 sn FCZ193991KJ ! ! ! redundancy ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 188.8.131.52 255.255.0.0 ip nat inside ip virtual-reassembly in duplex auto speed auto ! interface GigabitEthernet0/1 no ip address duplex auto speed auto ! interface GigabitEthernet0/1.110 encapsulation dot1Q 110 ip address 10.1.110.1 255.255.255.0 ! interface GigabitEthernet0/1.120 encapsulation dot1Q 120 ip address 10.1.120.1 255.255.255.0 ! interface GigabitEthernet0/1.130 encapsulation dot1Q 130 ip address 10.1.130.1 255.255.255.0 ip nat outside ip virtual-reassembly in ! interface GigabitEthernet0/1.140 encapsulation dot1Q 140 ip address 192.168.140.1 255.255.255.0 ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ! ! ! access-list 1 permit any ! control-plane ! ! ! line con 0 line aux 0 line 2 no activation-character no exec transport preferred none transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 login transport input none ! scheduler allocate 20000 1000 ! end Router#
On the D-Link switch I am configuring the 802.1Q Asymmetric VLAN without any success. My configuration is as follows.
Port 2 on the switch is where my PC (configured with the proper IP Address) will be connected. I am however unable to ping the gateway 192.168.140.1
Have I missed anything or is the configuration incorrect?