3

I'm trying to nest some EIGRP configurations on a router in GNS3.

I'm trying to connect the EIGRP 2801 in SW01 to RTR-01 and EIGRP 2864 to RTR-02 when I do.

When I put no passive-interface FastEthernet 2/0 on address-family vrf 4 this error is shown:

%EIGRP: Interface FastEthernet2/0 is not a member of this routing table

Why?

INFO

Diagram

  • 10.28.79.4/30 between SW01 / RTR-01
  • 10.28.79.8/30 between SW02 / RTR-02
  • 10.28.79.0/30 between RTR-01 / RTR-02
  • Loopback 0 at RTR-01 10.28.254.1/32
  • Loopback 0 at RTR-02 10.28.254.2/32
  • 10.28.66.0/26 in SW-ESA
  • 10.28.78.0/26 in SW-ESA
  • 10.28.1.0/26 in SW-01

  • EIGRP 2801 in SW-01 and RTR-01

  • EIGRP 2864 in SW-ESA and RTR-02
  • BGP 65001 between RTR-01 and RTR-02

RTR-01 configuration:

version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname RTR-01
!
boot-start-marker
boot-end-marker
!
no aaa new-model
ip cef
!
ip vrf 1
 description scada
 rd 65001:1
 route-target export 65001:1
 route-target import 65001:1
!
ip vrf 4
 description intranet
 rd 65001:4
 mdt default 239.1.1.1
 mdt data 238.2.2.0 0.0.0.255 threshold 1
 route-target export 65001:4
 route-target import 65001:4
!
ip domain name xx.xx.xxx
no ipv6 cef
!
multilink bundle-name authenticated
!
ip ssh version 2
!
interface Loopback0
 ip address 10.28.254.1 255.255.255.255
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex full
!
interface GigabitEthernet1/0
 ip address 10.28.79.1 255.255.255.252
 negotiation auto
!
interface FastEthernet2/0
 ip address 10.28.79.5 255.255.255.252
 speed auto
 duplex auto
!
interface FastEthernet2/1
 no ip address
 shutdown
 speed auto
 duplex auto
!
router eigrp 8000
 !
 address-family ipv4 vrf 4 autonomous-system 2801
  redistribute bgp 65001 metric 10000 100 255 1 1500
  network 10.0.0.0
  network 10.28.1.0 0.0.0.63
  distribute-list prefix default out
 exit-address-family
!
router bgp 65001
 bgp router-id 10.28.254.1
 bgp log-neighbor-changes
 network 10.28.1.0 mask 255.255.255.192
 network 10.28.254.0 mask 255.255.255.0
 redistribute eigrp 1094 route-map depurascada
 neighbor 10.28.254.2 remote-as 65001
 neighbor 10.28.254.2 update-source Loopback0
 !
 address-family vpnv4
  neighbor 10.28.254.2 activate
  neighbor 10.28.254.2 send-community extended
 exit-address-family
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip prefix-list default seq 5 permit 0.0.0.0/0 le 8
!
ip prefix-list depuraigp seq 5 permit 10.0.0.0/8 ge 32
ip prefix-list depuraigp seq 10 deny 10.0.0.0/8 ge 30
ip prefix-list depuraigp seq 15 permit 0.0.0.0/0 le 29
!
ip prefix-list depuravrf1 seq 5 deny 0.0.0.0/0 ge 30
ip prefix-list depuravrf1 seq 10 permit 0.0.0.0/0 le 29
!
ip prefix-list depuravrf4 seq 5 permit 10.0.0.0/8 ge 32
ip prefix-list depuravrf4 seq 10 deny 10.0.0.0/8 ge 30
ip prefix-list depuravrf4 seq 15 permit 0.0.0.0/0 le 29
access-list 103 deny   tcp any any eq 445
access-list 103 deny   tcp any any eq 139
access-list 103 permit ip any any
!
route-map depurascada permit 5
 match ip address prefix-list depuravrf1
!
route-map depuraintra permit 5
 match ip address prefix-list depuravrf4
!
route-map nobucle permit 5
 set extcommunity soo 65001:1
!
mpls ldp router-id Loopback0
!
control-plane
!
line con 0
 stopbits 1
line aux 0
 stopbits 1
line vty 0 4
 login
!
!
end

RTR-02 configuration:

version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname RTR-02
!
boot-start-marker
boot-end-marker
!
no aaa new-model
ip cef
!
ip vrf 1
 description scada
 rd 65001:1
 route-target export 65001:1
 route-target import 65001:1
!
ip vrf 4
 description intranet
 rd 65001:4
 mdt default 239.1.1.1
 mdt data 238.2.2.0 0.0.0.255 threshold 1
 route-target export 65001:4
!
ip domain name xx.xx.xxx
no ipv6 cef
!
multilink bundle-name authenticated
!
ip ssh version 2
!
interface Loopback0
 ip address 10.28.254.2 255.255.255.255
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex full
!
interface GigabitEthernet1/0
 ip address 10.28.79.2 255.255.255.252
 negotiation auto
!
interface FastEthernet2/0
 ip address 10.28.79.9 255.255.255.252
 speed auto
 duplex auto
!
interface FastEthernet2/1
 no ip address
 shutdown
 speed auto
 duplex auto
!
router eigrp 8000
 !
 address-family ipv4 vrf 4 autonomous-system 2864
  redistribute bgp 65001 metric 10000 100 255 1 1500
  network 10.0.0.0
  passive-interface default
  distribute-list prefix default out
 exit-address-family
!
router bgp 65001
 bgp router-id 10.28.254.2
 bgp log-neighbor-changes
 network 10.28.78.0 mask 255.255.255.192
 network 10.28.254.0 mask 255.255.255.0
 redistribute eigrp 1094 route-map depurascada
 neighbor 10.28.254.1 remote-as 65001
 neighbor 10.28.254.1 update-source Loopback0
 !
 address-family vpnv4
  neighbor 10.28.254.1 activate
  neighbor 10.28.254.1 send-community extended
 exit-address-family
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip prefix-list default seq 5 permit 0.0.0.0/0 le 8
!
ip prefix-list depuraigp seq 5 permit 10.0.0.0/8 ge 32
ip prefix-list depuraigp seq 10 deny 10.0.0.0/8 ge 30
ip prefix-list depuraigp seq 15 permit 0.0.0.0/0 le 29
!
ip prefix-list depuravrf1 seq 5 deny 0.0.0.0/0 ge 30
ip prefix-list depuravrf1 seq 10 permit 0.0.0.0/0 le 29
!
ip prefix-list depuravrf4 seq 5 permit 10.0.0.0/8 ge 32
ip prefix-list depuravrf4 seq 10 deny 10.0.0.0/8 ge 30
ip prefix-list depuravrf4 seq 15 permit 0.0.0.0/0 le 29
access-list 103 deny   tcp any any eq 445
access-list 103 deny   tcp any any eq 139
access-list 103 permit ip any any
!
route-map depurascada permit 5
 match ip address prefix-list depuravrf1
!
route-map depuraintra permit 5
 match ip address prefix-list depuravrf4
!
route-map nobucle permit 5
 set extcommunity soo 65001:1
!
mpls ldp router-id Loopback0
!
control-plane
!
line con 0
 stopbits 1
line aux 0
 stopbits 1
line vty 0 4
 login
!
end

This is the shown version:

BOOTLDR: 7200 Software (C7200-ADVIPSERVICESK9-M), Version 15.2(4)S5, RELEASE SOFTWARE (fc1)

  • You need to edit your question to clarify what the different network addresses are, and include the full configurations of both routers. Give us as much information as you have. – Ron Maupin Jan 18 '18 at 19:27
  • Based on the error message, interface Fa 2/0 is not included in the EIGRP domain. – Ron Trunk Jan 18 '18 at 19:33
  • @RonTrunk can you explain further? – Rafael Jan 18 '18 at 19:36
5

You have to put your interfaces into vrf 4.

interface fa 2/0
ip vrf forwarding 4

An interface can only be in one vrf. Otherwise, how would the router know which interface to use?

If you don't specify a vrf, the interface is put into the global table. But your EIGRP process is configured to use vrf 4.

| improve this answer | |
4

From your configs, interface FastEthernet2/0 is not part of vrf 4 that your EIGRP is configured for oneither of your routers. Try adding your interface to the vrf with the following.

interface FastEthernet2/0
ip vrf forwarding 4
| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.