1st time poster, I am trying to get two vlans talking to each other with out using a router. As I understand it the 3750 is layer 3 capable there for I would like to be able to get vlan 10 out to my router to the internet. What is going is I have 4 Hosts for Virtualization and it needs to get out the internet to get images down to the nodes. I am using Joyent Triton Datacenter so you know (This has to be on it's own segment because it uses pxe boot w/dhcp to configure Compute Nodes). I already have a dhcp server on Vlan1.
Is vlan tagging an option? If so can someone point to a good tutorial to help me learn it.
Vlan1 consist of fastEthernet0/1 Through fastEthernet0/9 Vlan10 consist of fastEthernet0/10 Through fastEthernet0/19(This needs to be able to talk to the internet).
Vlan1 ip is xxx.xxx.1.0 Vlan10 ip is xxx.xxx.10.0
Here is the Vlan setup
show ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route C xxx.xxx.10.0/24 is directly connected, Vlan10 C* xxx.xxx.1.0/24 is directly connected, Vlan1
Vlan1 is the default network
The router I have is a Netgear Router not able to trunk, I know I know but it's the best I can do at the moment. and I need the Wifi.
If someone could help get this done I have configured it all the way to this point but now I am stuck here, I have been studyng interVLAN routing, I am just not sure how to finish this.
note: I know a bit about networking but I am not a Network Admin or Engineer
Thanks in Advance,
Michael P S I have my configs in a text file also if anyone wants to see them to help me resolve this. FYI Switch 2 is the one in question.