I have already referred to this similar question: Telnet or SSH into a Cisco router but the procedure did not work for me.
I have a Cisco 891W. I am able to log in via the console port just fine with username:password. I see a Telnet interface and get an interactive prompt there, but using the same username:password that is successful on console login fails. Likewise, attempting to access a web interface at the same IP with the same credentials fails.
Here is a portion of my
show run to give an idea of what's been done.
enable secret 5 mysecret enable password mypassword ! aaa new-model ! aaa authentication login default local ! username myuser password 0 mypassword username admin privilege 15 secret 5 mysecret ! ip access-list standard access-internal-only permit 192.168.1.0 0.0.0.255 ! control-plane host management-interface FastEthernet0 allow https ssh snmp line vty 0 4 access-class access-internal-only in password mypassword transport input telnet ssh line vty 5 15