Once here I ask about LACP between rb750 and huawei ne20, as @Zac67 said
"throughput for multiple flows, not for a single flow"
. I was testing from a single flow, now is working, but I came across with something after this.
My new test is: establish 2GB between a
Huawei Switch s6720 and
Mikrotik Rb1100. As you can note, before I was using
The biggest different that I noted was a single configuration about
## NE20 ## interface Eth-Trunk1 portswitch port link-type access port default vlan 200 mode lacp-static
## Switch S6720 ## interface Eth-Trunk1 port link-type access port default vlan 200 mode lacp
Display Information Huawei S6720
Eth-Trunk1 current state : UP Line protocol current state : UP Description: Switch Port, Link-type : access(configured), PVID : 200, Hash arithmetic : According to SIP-XOR-DIP,Maximal BW: 2G, Current BW: 2G, The Maximum Frame Length is 9216 IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is f098-3827-8570
Local: LAG ID: 1 WorkingMode: LACP Preempt Delay: Disabled Hash arithmetic: According to SIP-XOR-DIP System Priority: 32768 System ID: f098-3827-8570 Least Active-linknumber: 1 Max Active-linknumber: 8 Operate status: up Number Of Up Port In Trunk: 2
Now, I'd like to compare their
display Eth-Trunk 1 (S6720 and Ne20). Above is s6720, bellow is Ne20.
Local: LAG ID: 1 WorkingMode: STATIC Preempt Delay: Disabled Hash arithmetic: According to flow System Priority: 32768 System ID: 487b-6b4a-cc5c Least Active-linknumber: 1 Max Active-linknumber: 16 Operate status: down Number Of Up Ports In Trunk: 0 Timeout Period: Slow
Pay attention to
WorkingMode: one is
Static and the other just
Testing LACP (Using BTest)
Both Mikrotik (A,B,C) are sending 1GB to (Mikrotik Port-Aggregation). That scenario is working.
Same test using btest, but in this scenario, just 1GB is coming.
I'm not sure but I think the problem is the mode which should be "static" but
S6720 does not allow this mode.