Hello I have a Cisco asa5508 and I want to NAT 2 internal IP's to 2 public IP's that I have.Each IP on its own.
Currently I have NatPool and it's working either with the one IP or with the other.
Is it possible to make static NAT for each set of IP's? Lets say 10.x.x.101 to 200.x.x.201 and 10.x.x.102 to 200.x.x.202?
What options do I have? Can you advise with the commands?
Thanx in advance.
Here some config
show xlate
3 in use, 105 most used
Flags: D - DNS, e - extended, I - identity, i - dynamic, r - portmap,
s - static, T - twice, N - net-to-net
NAT from outside:151.x.x.13 to DMZ:10.x.x.13
flags s idle 137:57:35 timeout 0:00:00
NAT from outside:151.x.x.14 to DMZ:10.x.x.14
flags s idle 137:57:35 timeout 0:00:00
NAT from DMZ:10.x.x.13 to outside:151.x.x.13 flags i idle 0:00:04 timeout 3:00:00
show running-config nat
object network PubIP
nat (outside,DMZ) static 10.x.x.14
object network PubIP2
nat (outside,DMZ) static 10.x.x.13
object network DMZ-LAN
nat (DMZ,outside) dynamic NatPool
show runn object
object network PubIP
host 151.x.x.14
object network IP
host 10.x.x.14
object network PubIP2
host 151.x.x.13
object network IP.13
host 10.x.x.13
object network NatPool
range 151.x.x.13 151.x.x.14
Thank You.
{
and}
.