I have to work with an FPGA module already running a code written by someone else. I have no access to the FPGA code.
Now the setup is something like this:-
- FPGA is connected to the pc via ethernet cable.
- PC is also connected to the internet via ethernet cable on a different interface card. (there are 2 NIC installed on the pc)
As soon as the FPGA module is turned ON, it establishes the connection with the pc and starts sending the readings/data as UDP datagrams. I am interested in the data.
So, to understand the frame structure of the UDP packets, I ran Wireshark. The output of all the received packets on that specific ethernet card is shown below.
hfmajestrix.local is my pc and it has a static IP.
Can someone explain me whats happening after that ARP request from my pc in the fourth packet?
PC sends an ARP request to know which node has IP 169.254.37.110. Where is the ARP response?
Also, Where does IP 192.168.10.150 come from when there is NO router attached to the pc and when pc is asking for IP 169.254.37.110?