1

When I use display interfaces there shows many data. I have to use Space to skip pages to see more content.

Description:HUAWEI, AR Series, GigabitEthernet0/0/1 Interface
Route Port,The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc8e-1f05
Last physical up time   : -
Last physical down time : 2018-10-23 15:37:15 UTC-08:00
Current system time: 2018-10-23 15:54:46-08:00
Port Mode: COMMON COPPER
Speed : 1000,  Loopback: NONE
Duplex: FULL,  Negotiation: ENABLE
Mdi   : AUTO
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Input peak rate 0 bits/sec,Record time: -
Output peak rate 0 bits/sec,Record time: -

Input:  0 packets, 0 bytes
  Unicast:                  0,  Multicast:                   0
  Broadcast:                0,  Jumbo:                       0
  Discard:                  0,  Total Error:                 0

  CRC:                      0,  Giants:                      0
  Jabbers:                  0,  Throttles:                   0
  Runts:                    0,  Symbols:                     0
  Ignoreds:                 0,  Frames:                      0

Output:  0 packets, 0 bytes
  Unicast:                  0,  Multicast:                   0
  Broadcast:                0,  Jumbo:                       0
  ---- More ----

Is there any command for list brief information of HuaWei IOS's Interfaces?

  • I'm just guessing, but what about display interface brief? – user36472 Oct 23 '18 at 8:19
  • it means display less information. you see upper, every one interface log much data. – qg_java_17137 Oct 23 '18 at 9:19
  • You did ask Is there any command for list brief information of HuaWei IOS's Interfaces? – user36472 Oct 23 '18 at 9:26
  • @Cown Yes, I want to list all Interfaces in one page. – qg_java_17137 Oct 23 '18 at 9:40
  • I'm confused, did you try display interface brief? – user36472 Oct 23 '18 at 9:45
1

Using the display interface brief command, you can view information about all the interfaces on the equipment, including the physical status, protocol status, bandwidth usage in the inbound and outbound direction during a certain period of time, and the numbers of sent and received packets with errors.

<Quidway> display interface brief
PHY: Physical
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
(b): BFD down
(e): ETHOAM down
(d): Dampening Suppressed
InUti/OutUti: input utility/output utility
Interface                   PHY   Protocol InUti OutUti   inErrors  outErrors
Ethernet0/0/1               down  down        0%     0%          0          0
Ethernet0/0/2               down  down        0%     0%          0          0
Ethernet0/0/3               down  down        0%     0%          0          0
Ethernet0/0/4               down  down        0%     0%          0          0
Ethernet0/0/5               down  down        0%     0%          0          0
Ethernet0/0/6               down  down        0%     0%          0          0
Ethernet0/0/7               down  down        0%     0%          0          0
Ethernet0/0/8               down  down        0%     0%          0          0
Ethernet0/0/9               down  down        0%     0%          0          0
Ethernet0/0/10              down  down        0%     0%          0          0

Source: http://support.huawei.com/hdx/pages/SE0000502997DEA01271/01/SE0000502997DEA01271/01/resources/s/display_interface_brief.html

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.