I have one Windows server 2012R2 which has 10.219.1.1 IP address & I also have Cisco Catalyst 2960-X Series which is layer 2, we managed to do inter VLAN routing by updating its firmware, where we got limited routing feature. Now we have made 5 VLANs in it so how do I get automatically IP addresses from my DHCP server for particular VLANs?
You need to use DHCP helper address in your middle routers or switches between your dhcp server and your vlan nodes
Take a look of this link: https://www.cisco.com/en/US/docs/ios/12_4t/ip_addr/configuration/guide/htdhcpre.html
Hope this helps. Regards
Catalyst switch Cisco 2960 is layer2 switch can't configure DHCP scopes configuration in this switch . Window server 2012 R2 can be used as DHCP server . Enable DHCP features on this server and configure DHCP scopes and pools as per your requirement . And connect server in network . Make sure that this dhcp server is reachable from any where in network .
Lan is segregated as 5 Vlans . Accordinglly DHCP server can be configured . Now all the client machines connected among 5 Vlan receives automatically ip allocation fron DHCP server.