I have a Router1 with a loopback 0 connected to the Router2:
the interface brief is bellow:
Router1>show ip interface brief Interface IP-Address OK? Method Status Protocol GigabitEthernet0/0/0 10.0.12.1 YES manual up up GigabitEthernet0/0/1 unassigned YES unset administratively down down Loopback0 22.214.171.124 YES manual up up Vlan1 unassigned YES unset administratively down down
the ip route is bellow:
Router1#show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 126.96.36.199/32 is subnetted, 1 subnets C 188.8.131.52/32 is directly connected, Loopback0 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C 10.0.12.0/24 is directly connected, GigabitEthernet0/0/0 L 10.0.12.1/32 is directly connected, GigabitEthernet0/0/0
I have a question, what's the logic relationship of Router1 and its loopback0?
if we regard the loopback0 as its a logic router interface, the
184.108.40.206/32 should be
L, because the Gig0/0/0's ip is
if we regard the loopback0 as a independent Server(because its relationship is
connected), it should have something to connect the loopback0, right?