Using SuperMicro network module, which related to Intel SDN product, the command PDF . and the Web GUI manual.
there I have qe57
, qe61
, qe65
, qe69
four upstream ports, I want to aggregate them to one logical port.
so thanks for TeunVink and Zac67 I know use the channel-group
command can put them into one port-channel
.
now, my circumstances is, the qe57
is connected to converge Switch, the other qe
ports do not, such as qe61
, and so on.
my problem is, I can add qe61
, qe65
, qe69
into LAG. but I can not add the qe57
:
with the error:
192.168.200.1 (config-if qe57)#channel-group 3800 aggregation multiple
Error! Param1
the difference between them. if add the qe57 into the channel-group, I think there all will be LAGMembers
. there still is Physical at now.
EDIT-01
This is the different between qe57
and qe61
configuration:
192.168.200.1 (config-if qe57)#show running-config | begin qe57
interface qe57
no ip igmp snooping
no ip igmp snooping router-port
description "qe57"
shutdown
speed 40000
no cut-through
max-frame-size 1524
no mac-address-table learning-mode
flowcontrol send off
flowcontrol receive off
no switchport discard
no switchport ingress-filtering
no switchport pvid
no switchport pvpt
mac-mode normal
no switchport dot1qtunnel
spanning-tree cost 500
no spanning-tree edge-port
spanning-tree edge-port auto
no spanning-tree enable
spanning-tree mac
no spanning-tree mcheck
spanning-tree point-to-point-mac force
spanning-tree priority 8
no spanning-tree bpduguard enable
no spanning-tree portfast
no spanning-tree rootguard
dcb admin enable
dcb tx pfc
dcb tx ets-conf
no dcb tx ets-reco
dcb tx app
dcb tx cn
no dcb pfc willing
no dcb pfc priority
no dcb pfc mbc
no dcb ets willing
no dcb ets cbs
dcb ets max-tcs 0
no dcb ets-conf bandwidth
no dcb ets-conf algorithm
no dcb ets-conf pri-assigment
no dcb ets-reco bandwidth
no dcb ets-reco algorithm
no dcb ets-reco pri-assigment
no dcb app willing
dcb cn cnpv-supported 0,0,0,0,0,0,0,0
dcb cn cnpv-ready 0,0,0,0,0,0,0,0
no mls qos trust
no mls qos map cos-bandwidth
priority-queue
no mls qos map dot1p-cos
ovs port add spp0
no lldp transmit
no lldp receive
lldp tlv-select management-address
lldp tlv-select port-description
lldp tlv-select system-capabilities
lldp tlv-select system-description
lldp tlv-select system-name
lldp management-address ipv4 "169.254.1.1" system-port-number 57 "1.3.6.1.4.1.731.3.2.30.1.1.7"
exit
interface qe61
description "qe61"
shutdown
speed 40000
no cut-through
max-frame-size 1524
no mac-address-table learning-mode
flowcontrol send off
flowcontrol receive off
no switchport discard
no switchport ingress-filtering
no switchport pvid
no switchport pvpt
mac-mode normal
channel-group 3800 mode passive
channel-group 3800 aggregation multiple
channel-group 3800 timeout long
channel-group 3800 key 3800
channel-group 3800 lacp port-priority 128
no channel-group 3800 collecting
no channel-group 3800 defaulting
no channel-group 3800 distributing
no channel-group 3800 expired
no channel-group 3800 synchronization
channel-group 3800 partner key 0
channel-group 3800 partner number 1
channel-group 3800 partner priority 32768
channel-group 3800 partner system 00:00:00:00:00:00
channel-group 3800 partner system priority 8
dcb admin enable
dcb tx pfc
dcb tx ets-conf
no dcb tx ets-reco
dcb tx app
dcb tx cn
no dcb pfc willing
no dcb pfc priority
no dcb pfc mbc
no dcb ets willing
no dcb ets cbs
dcb ets max-tcs 0
no dcb ets-conf bandwidth
no dcb ets-conf algorithm
no dcb ets-conf pri-assigment
no dcb ets-reco bandwidth
no dcb ets-reco algorithm
no dcb ets-reco pri-assigment
no dcb app willing
dcb cn cnpv-supported 0,0,0,0,0,0,0,0
dcb cn cnpv-ready 0,0,0,0,0,0,0,0
no mls qos trust
no mls qos map cos-bandwidth
priority-queue
no mls qos map dot1p-cos
lldp transmit
lldp receive
lldp tlv-select management-address
lldp tlv-select port-description
lldp tlv-select system-capabilities
lldp tlv-select system-description
lldp tlv-select system-name
lldp management-address ipv4 "169.254.1.1" system-port-number 61 "1.3.6.1.4.1.731.3.2.30.1.1.7"
exit
who can tell me where is the issue?