I'm preparing for JNCIS-SEC exam. I used junos-vsrx-12.1X47-D20.7-domestic image to create virtual machine in order to practice for the exam.
I am following this to configure the vsrx. When I do the following command :
set interfaces fxp0 unit 0 family inet dhcp client
and after doing
show system services dhcp client I got the following output
The network adapters of the virtual machine are set up as follows network adapter 1: bridged network adapter 2: vmnet 4 network adapter 3: vmnet 5
I am working on a pc which is connected to local area network which uses Juniper switches. The port I am connected to might not be configured as
why I am not obtaining an IP address ??
The selected answer solved the problem along with the following command :
set interfaces ge-0/0/0 unit 0 family inet dhcp
dhcp client in the previous command