I have Cisco Layer 3 switch with IP routing enabled on it. I have different VLANs configured on it and its working perfectly. Now i have added another VLAN (SVI) and assigned that VLAN to one of the port , but VLAN interface is still showing "VLAN350 is down, line protocol is down". I made sure i entered "no shutdown" command on SVI and physical interface. Following is my config. Please tell me what i am doing wrong.
ip dhcp pool VLAN-350-POOL network 192.168.10.0 255.255.255.0 default router 192.168.10.1 dns-server 22.214.171.124 126.96.36.199 lease 2 spanning-tree mode rapid-pvst spanning-tree loopguard default spanning-tree portfast bpduguard default spanning-tree extend system-id spanning-tree vlan 1,100,200,300 priority 0 interface GigabitEthernet1/9 switchport access vlan 350 switchport mode access keepalive 1 speed 1000 duplex full spanning-tree portfast interface vlan350 ip address 192.168.10.1 255.255.255.0
I have attached a laptop to Gigabit Port 1/9 and its not getting any IP address from the pool (Since VLAN350 is still not coming up).
Any help is appreciated. Thanks.