I'm a beginner in networking stuff and just wondered if Static Routing has any use in large networks ? How about small ones ?

In which cases we prefer to use static over dynamic routing ? I searched for this one and the most reason i saw people mentioned was resource usage problem with dynamic routing .


  • 1
    Define "large network"? You'll find static routes in configurations everywhere. The entire network, however, will most likely not be strung together out of statics -- because it would be an manageable mess.
    – Ricky
    Mar 23, 2019 at 20:28

3 Answers 3


There are corner cases where static routing may be used in large networks, but static routing doesn't scale, so large networks will be run with dynamic routing. It would be a difficult to impossible task to maintain a large network using static routing, and the odds are a simple misconfiguration could cause big problems. Most modern business routers have no resource problems with dynamic routing protocols.

Small networks are fine to use static routing. A network with a single router doesn't even need to configure any static routes because a router will inherently know about the directly connected networks.

  • So can we say static routing almost has no use in these days networks ?
    – Stick
    Mar 23, 2019 at 0:21
  • I wouldn't say no use, but it is pretty rare in medium or large networks. It is a lot of work to build and properly maintain it on a large scale. Dynamic routing is generally pretty easy to configure, and it it can automatically adapt to changes.
    – Ron Maupin
    Mar 23, 2019 at 0:25
  • 1
    As an example, I still sometimes see "floating static routes" for usage cost backup links (pay per time used or amount of traffic) at remote sites. Often this is a static default route that is given a high cost that will only be used if the dynamic routes are lost for some reason (i.e. the main link or links fail).
    – YLearn
    Mar 23, 2019 at 1:06

I work at a large ISP and before at a different large ISP and both networks extensively use static routing. Mostly on the firewalls as they don’t want to run an IGP or BGP on the firewalls, but you can also find static routes on routers and even on end hosts.

  • The implementation of OSPF on firewalls often was very buggy (and perhaps often still is) which is why companies tend to prefer static routing on firewalls. These inplementations are often also quite basic, lacking many of the features you find on the routers.
  • An end host with multiple interfaces (e.g. production and management) might need static routes to steer outbound traffic over the correct interface. I’ve also seen RIP being used for this, running between the end hosts and their first-hop routers.
  • For static routes on routers, an example can be pointing towards the firewalls, as they can’t receive any routes from them. There are also corner cases but I can’t come up with any right now.

Usage of type of routing protocols in network is total depends upon organization business nature and requirement. Size of network is not really matters when choosing routing protocol to configure in networks

Yes static routing is easy and scalable to use in any network topology . independent of size of network.

Advantages of using static routes are..

1 ) Easy to manage and implement and configure in small and medium scales networks 2) Layer3 devices resources utilisation is optimised with static routes .Whereas dynamic routing protocols consume more CPU and RAM resource utilisation.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.