0

Is there any ways that we can understand a network is quite stable?

In previous time a serial network interface did fail sometimes to establish a connections.

Now I have replaced a new one [something like this ], and I'm trying to understand how I can evaluate the stability of the network that is established.

  • Did any answer help you? If so, you should accept the answer so that the question doesn't keep popping up forever, looking for an answer. Alternatively, you can provide and accept your own answer. – Ron Maupin Dec 15 '19 at 18:45
1

Basically, you can monitor the network ports for faults or test each link/path for errors.

Monitoring:

  • error counters on managed switch ports
  • error counters on host/NIC side
  • port status (link state, speed, duplex mode)
  • device availability (ping, status page, telnet, ...)

SNMP can be used for permanent monitoring and generating automated traps in case of an error.

Active testing:

  • have the deployed cabling (re)certified to the specs
  • (extended) throughput test with gigabit link in both directions simultaneously (for all pairs), e.g. with iperf3
  • check error counters afterwards

COM servers can have quirks of their own. Make sure you've got a decent device, the latest firmware installed and the power is reliable (PoE from the switch is best).

If you can't use continuous monitoring (client network/remote network without facilities) it's practically impossible to know if the network is (currently) working correctly. Note that finding and eliminating intermittent problems in a complex network is a science of its own.

Especially when the connection is running across the Internet there may be no way to ensure reliable operation, and the devices and protocols in question would need to be able to handle packet loss and buffer even lengthy outages. If that is not possible either you can't use a simple COM server and will need to use local buffering on a larger device, an embedded server or so.

| improve this answer | |
0

It's very general question ;)

You have many options, i.e. using telemetry (it very depends on network device you are using) or external monitoring tools to track your connection status (i.e. track parameters via SNMP etc., or simply try to ping remote device).

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.