I wanted to route from PC-1 to PC-2 using EIGRP. The connection between all of the three routers are through BGP protocol. PC-3 should not receive any routing to PC-1 and PC-2. T
The problem is now I can ping from PC-1 to RTR-3, however there is no route to PC-2. All of the redistribution route I found from internet is only from EIGRP to BGP. So is it possible from EIGRP to BGP to EIGRP back?
router bgp 10000 network 18.104.22.168 mask 255.255.255.252 neighbor 22.214.171.124 remote-as 10001 router eigrp 100 network 192.168.1.0 0.0.0.255 redistribute bgp 10000
router bgp 10001 network 126.96.36.199 mask 255.255.255.252 network 188.8.131.52 mask 255.255.255.252 network 192.168.3.0 mask 255.255.255.0 neighbor 184.108.40.206 remote-as 10000 neighbor 220.127.116.11 remote-as 10000
router bgp 10000 network 18.104.22.168 mask 255.255.255.252 neighbor 22.214.171.124 remote-as 10001 router eigrp 100 network 192.168.2.0 0.0.0.255 redistribute bgp 10000
Is it feasible if I were also to use DMVPN/Site to Site tunnel network and advertise to IGP?