I want to configure Interfaces 0/3, 1/2 and 1/3 for example. Using interface range gig 0/3-1/3 did not work, is it simply not possible or is there a different syntax?
EDIT: Of course aside using interface range gig 0/3 , gig 1/2-3
-
No, and neither does it work with chassis switches where you use slot numbers instead of switch numbers. The stack looks like a chassis switch with slots, where each switch in the stack represents a slot in the chassis. – Ron Maupin♦ Oct 12 '20 at 12:19
-
"0/3-1/3" is not remotely the same as "0/3, 1/2-3". How many ports are there on slot 0? The former would change 0/3, 0/4, 0/5, ... 0/48 (48 port module), 1/1, 1/2, and 1/3. Obviously not the 3 ports you want. Which is why no IOS I'm aware of allows ranges to cross modules. – Ricky Oct 12 '20 at 19:27
That won't work. After all, you could swap a module for a larger one and then 0/3-1/3 would mean something else...
