3

I’m trying to better my understanding of PI and PA addresses, and I want to know if ISPs generally assign PI or PA addresses to their customers, or if this distinction even matters at this scope.

Assuming no NAT, do ISPs assign customers IPs from a PI block or a PA block? Does it matter? Or, under what circumstances is there a difference?

1
  • Also, see this answer about companies using addressing not assigned to them.
    – Ron Maupin
    Jan 5 at 18:58
4

Firstly, it's important to understand who allocates each address space. PI (Provider Independent) are assigned by a local RIR (RIPE, APNIC, AFRINIC, ARIN, etc) to a Provider/Business/Entity. Whereas PA (Provider Aggregates) are allocated by an ISP/Entity to a customer.

With PIs, as the name suggests, the PI address space allocated is independent of a single ISP. The entity that has been allocated this space by the RIR can freely advertise this space anywhere on the Global Internet from their allocated ASN. One thing to note is that a PI must be in length from a /1 up-to a /24, nothing longer than a /24 will be allocated by a RIR.

PA's (Provider Aggregates) on the other hand are allocations performed by ISPs to their downstream customers. These can be anywhere from a /25 up-to a /32. These PAs will be allocated from a larger block that the ISP/Entity has received from its local RIR.

8
  • 1
    In the current environment, you should probably also refer to IPv6 because the RIRs no longer have IPv4 addressing to assign (except that some have reserved a small amount to facilitate conversion to IPv6).
    – Ron Maupin
    Jan 4 at 0:15
  • Does this mean there are no distinction between PI and PA blocks at the RIR level? And that an IP block assigned by an RSR becomes PA at the discretion of an ISP?
    – teemaw
    Jan 4 at 0:20
  • 1
    @teemaw, the ISP is a company, just like any other company asking an RIR for address space, but an ISP can use its assigned addressing in any way it wants, including letting its customers use some of its space. The RIRs only look at the number of required addresses, and ISPs will have a need for more addresses than most companies, although there are companies (like the one I work for) that have networks larger than many ISPs.
    – Ron Maupin
    Jan 4 at 0:24
  • 1
    @teemaw, not exactly. PI is provider-independent, meaning you can connect to any provider (ISP) (as long as it is willing to advertise your network, and not all will do that). PA is provider-assigned. To the ISP that has that addressing, it is PI (can be connected to any other ISPs by the ISP, which is how the Internet works), but to its customers, it is PA because it is assigned by the provider (ISP), and it can only be used with the assigning provider.
    – Ron Maupin
    Jan 4 at 0:44
  • 1
    If you get provider-independent addressing, you can have any ISP to which you are connected to advertise it for you. If you get provider-assigned addressing from an ISP, then only that ISP will advertise it for you because the ISP will object if other ISPs advertise it not through it. As I understand it, the LIR can sell you provider-independent addressing.
    – Ron Maupin
    Jan 4 at 2:40
3

Customer address pools & re-assignments come from PA space.

You can use PI for your own network/business but it's not intended to be delegated to customers.

6
  • 2
    Where do you think PA space comes from? (hint: PI)
    – Ricky
    Jan 4 at 2:05
  • 1
    No, @Ricky, PA space does not come from PI. They are distinct types of allocations made by RIPE. You cannot carve PA out of PI. Jan 4 at 12:54
  • The LIR assigns a block of addresses. The holder of that block can do whatever they want with it. Including divide it up and let others announce it. "ADDRESS IN THIS BLOCK ARE NON-PORTABLE" is only words, they are not policy. (I've done it many times.)
    – Ricky
    Jan 4 at 21:18
  • No, you cannot make PI addresses from PA space. PI addresses are a special thing in the RIPE region. This is completely distinct from how things operate in the ARIN region -- where your statements would be correct, if that was what the OP was asking about. He's not. Jan 4 at 21:37
  • Again, it's just words on a page. [RIPE-738 for IPv6] I see it all the time (for v4.) The only thing RIPE can actually enforce is not allowing whois records for dividing PI space. They don't police the internet routing table. [PI is an assignment, not an allocation, so it's not supposed to be sub-assigned. If you report it to them, they might do something about it, but I doubt it.]
    – Ricky
    Jan 4 at 22:45
3

A business wanting provider-independent addressing gets that directly from its RIR. Any addressing a business gets from an ISP belongs to the ISP.

An ISP cannot assign addressing not assigned to it.

11
  • The terminology in this question indicates the user is probably asking about the RIPE region. LIRs can facilitate PI allocations; one reason for this option is language & currency barriers. I think your answer is meant to answer for the ARIN region, and it's correct there; but RIPE is quite different. Jan 4 at 0:12
  • Actually, the OP is in the U.S., or at least asking from a host in the U.S.
    – Ron Maupin
    Jan 4 at 0:18
  • 1
    @teemaw, when IANA got down to five /8 networks (16,777,216 addresses in each network) left to assign to the RIRs, It gave each RIR one, and that addressing was reserved to facilitate conversion to IPv6. There is a live widget on this page that show how many IPv4 addresses each RIR has left to assign.
    – Ron Maupin
    Jan 4 at 0:51
  • 1
    @user253751, It doesn't really work that way in theory. The Internet is made up of a collection of neighbours, these neighbours speak using BGP. BGP is a routing protocol with a heavy reliance on trust. If a BGP speaker begins to advertise space that does not belong to them this is known as a "BGP Hijack" (You can find plenty of examples on Google). Usually, a BGP Speakers neighbours will configure filters to only allow the BGP Speaker to advertise prefixes its allowed to.
    – ditrapanij
    Jan 4 at 11:45
  • 1
    Hijacking (active space) and squatting (abandoned space) are unfortunate modern realities. Reputable operators filter what they send and receive -- they don't blindly accept whatever you say you own. (sadly, there are a lot of ISPs -- many of whom know better -- that don't.) Filtering is not blacklisting -- that would be ignoring everything being claimed. (i.e. turning off the link)
    – Ricky
    Jan 4 at 22:52

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.