If multiples interfaces on a Cisco ASR 9K bridge domain are going to the same broadcast domain, can a loop occur ?
Something like this :
bridge-domain VLANX interface TenGigE0/0/0/0.X --> To client A, Switch A ! interface TenGigE0/0/0/1.X --> To client A, Switch B ! routed interface BVIX ! !
Client switches A and B are connected at layer 2.
I check the "Stom Control" with command
show l2vpn bridge-domain bd-name VLANX detail and noticed the following :
[...] Storm Control: bridge-domain policer [...]
bridge-domain policer mean here ?
If a loop can occur, what are the best possibility to keep this topology and prevent a broadcast storm (on router side) ?