O.P. Hi ,

I am trying to configure a Cisco LNS with VRF per Customer. Each customer that dial (PPPoE) to the LNS will bond to the appropiate VRF. The VRF will be assign according to the RADIUS AV-PAIR. I have already configured the RADIUS and the Cisco Router but for some reason it did not work. ( the L2TP tunnel shuts immediately ).

I will be thankful for any help or suggestion !!

My configuration:

( Cisco 3845 , IOS -advipservicesk9-mz.151-4.M8 )

Link : http://1drv.ms/1kuWjgM

  • Please show us what you've already configured. What platform and IOS?
    – user5025
    Jun 3 '14 at 14:58
  • Hi User5025 , I have just edited my post with the info you've asked for.Thanks
    – Tzakhi
    Jun 3 '14 at 21:49

Have you checked the debug outputs for l2x, ppp, radius?

One thing I see is that you should set ip unnumbered on your Virtual-Template. ip address negotiated means your end will try to get an address from the client, when you should be offering one to them (via the Framed-IP-Address and Framed-IP-Netmask attributes in the RADIUS Access-Accept)

First create a loopback interface (or if you want you can use g0/0 but loopback is best practice) and give it a /32 address, then:

interface Virtual-Template1
 ip unnumbered Loopback0
  • Hi Chris , Iwill configure it tonight and update with the results. Thanks!!
    – Tzakhi
    Jun 5 '14 at 12:06
  • Also you should put the Loopback interface you use for ip unnumbered on the vrf that the customer is attaching to. You can specify which loopback should be used for terminating PPP on a per-subscriber basis via the RADIUS AVpair: = "ip:ip-unnumbered=interface-name"
    – Chris
    Jun 5 '14 at 13:23
  • Hi Chris , thank you very much ... It works !!!!
    – Tzakhi
    Jun 5 '14 at 23:54

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.