I am not a network guru by any means but need to setup our router/switch to use SNMPv3. I am installing What's Up Gold on our system and configured the settings (changed for this post) as follows:
Username: testusername Authentication Protocol: sha Password: testpassword
On my router, I have ran the following:
snmp-server view TESTVIEW mib-2 included snmp-server group TESTGROUP v3 auth read TESTVIEW snmp-server user ALL TESTGROUP v3 auth sha testpassword snmp-server host 192.168.12.2 version 3 auth testusername snmp-server host 192.168.12.2 informs version 3 auth testusername
After inserting these commands, I go back to the SNMP software and attempt to discover the seed address 192.168.12.254, the gateway, but cannot receive a valid connection. I turned debugging on the router but receive nothing in
show log. I setup SNMPv2 to test and see if it could even see that and it worked just fine...I am guessing I am missing something in my router configuration...any ideas?