The MD5 digest between the VTP Server located on Switch1 and the VTP Client located on Switch2 have been synchronized.
Although the steps from this Q&A have been followed, a trunk has been created between VTP Client Switch3 and VTP Server Switch1, a discrepancy in MD5 digest remains and the VLANs created on Switch1 do not appear on Switch3.
Switch#sh vtp st VTP Version capable : 1 to 3 VTP version running : 1 VTP Domain Name : domain VTP Pruning Mode : Enabled VTP Traps Generation : Disabled Device ID : X.Y.Z Configuration last modified by X at Y Z Feature VLAN: -------------- VTP Operating Mode : Server Maximum VLANs supported locally : 1005 Number of existing VLANs : 6 Configuration Revision : 6 MD5 digest : 0xfc 0x5e 0x03 0x8d 0x38 0xa5 0x70 0x32 0x08 0x54 0x41 0xe7 0xfe 0x70 0x10 0xb0
interface GigabitEthernet0/X switchport trunk encapsulation dot1q switchport mode trunk switchport nonegotiate !
interface GigabitEthernet0/Y switchport mode trunk switchport nonegotiate !
Note: trunk type is required on Cisco IOS 3560 and
encapsulation dot1q is not available on Cisco IOS 2950