Questions tagged [snmpv3]
The snmpv3 tag has no usage guidance.
Understanding Cisco MIBs [closed]
I have setup my Cisco C9300 switches to send SNMP V3 traps to my log server as a backup for syslog. When it sends messages it just sends numbers with no actual message. I know I need some MIB files ...
What should be the appropriate index for the arp table entry in MIB file?
I am trying to make a generic arp table that collects all cached arp translations from all interfaces. (as a mib file to be used with SNMP) the structure of the table would look like this: I know ...
Explanation about SNMPv3 USM
Context I am having trouble understanding the USM model in SNMPv3. I base my research and understanding on RFC 3414. My problem is that authentication is not enforced in some implementations of SNMP, ...
Looking for more info on SNMP v3 Traps in Junos
I have a customer requirement where I need to be able to have Junos Space Network Management Platform be able to modify the severity of snmp traps on our routers and switches. So first I am trying to ...
Juniper SNMPv3 Issue with SRX and EX devices; no traps received by Junos Space
I've been seeing an ongoing problem with Juniper EX4300s and SRX 345 and 1500s. The problem that we continually see is that our monitoring servers stop receiving traps from these devices. I've had ...
SNMPv2 to v3 conversion
Can I use a Cisco router to convert SNMPv2 from an end device in one network to SNMPv3 and the C&M software in another network? The end device can only handle SNMPv2, but the C&M community is ...
SNMPv3 does not show all parameters
I configured SNMPv3 on my Cisco 1841 router. Then I added that router to my monitoring program. The problem is: it shows only ICMP loss, ICMP ping, ICMP response time and SNMP agent availibility. It ...
h3c switch - get which trunk group that a port belongs to via SNMP
Switch: HP FF 12900 with JG857A, JG626A and JG623A modules I want to get which trunk group a port is belongs to via SNMP on my h3c core switch. Which MIB and OID can I use to get that data via SNMP? A ...
snmpget for HP switch - ifType not found
I'm learning about fetching information via SNMP towards our HP switches. I'm trying to query a switch using the OID BRIDGE-MIB::dot1dTpFdbPort included with a known MAC address 50:65:f3:2e:c5:5c, as ...
Community String vs password - what’s the rationale behind the term name? [closed]
I’m just starting my learning of networking. The term “community string” refers to a type of password, Especially when it comes to sending/receiving configuration settings to/from a snmp server, ...
SNMPv3 context on IOS-XE does not seem to work with Prime
We recently switched to SNMPV3 and experience the issue, that there is no client data available within prime anymore. So we quickly read about the SNMP context we need to add to our devices ...