I Need some guidance on getting my lab networking configured. Any support is appreciated. 

My Lab consists of: 

    2 cisco switches: 2960s(access layer 2) and 3750X(ip routing/layer 3) 
    Xenserver with PFsense 6 eth ports

4 Vlans on the cisco switch configured:

    vlan1   svi 192.168.68.0/24 
    vlan100 svi 192.168.1.0/24
    vlan200 svi 192.168.2.0/24
    vlan600 svi 192.168.6.0/30 (transit network L3 to Pfsense)

I am working on setting up Intervlan routing, but cant see the vlan interfaces in PFsense...

Would I need a trunkport with 801.q, a /30 vlan, or a routed non-switchport connected to PFsense LAN/OPT?

Im following this guide but not able see VLan interfaces or establish communication with the Firewall and switch.

https://greigmitchell.co.uk/2019/08/configuring-intervlan-routing-with-a-layer-3-switch-and-pfsense/

Thanks for your time.