In the following topology my main purpose is to:


1)PC11 ping Router(R)



2)PC11 ping PC13


ESW10: 

In gig0/3 has the **no switchport** command and a given IP address. 

In gig0/2 it has the **switchport access VLAN 10** command. 

In gig0/0 it has a given IP and the **no switchport** command. 


In gi0/1 has **switchport access VLAN 10** command.





PC11 can ping PC9

R can ping ESW10

ESW10 can ping ESW11.

[![enter image description here][1]][1]


  [1]: https://i.sstatic.net/Phthb.png


So my question is what do I need to add and where in order for PC11 and PC9 to ping R and eventually PC13

Device Configs:


ROUTER

   

    interface GigabitEthernet0/0 
    ip address 192.168.2.1 255.255.255.0 
    duplex full 
    interface GigabitEtherneto/1
    ip address 192.168.3.1 255.255.255.0 
    duplex auto 


ESW10

    interface GigabitEthernet0/0 
    no switchport 
    ip address 192.168.1.1 255.255.255.0 
    negotiation auto
    interface GigabitEthernet0/1 
    switchport access vlan 10 
    switchport mode access 
    negotiation auto
    interface GigabitEthernet0/2 
    switchport access vlan 10 
    switchport mode access 
    negotiation auto
    interface GigabitEthernet0/3 
    no switchport 
    ip address 192.168.2.2 255.255.255.0 
    negotiation auto

ESW11

    interface GigabitEthernet0/0 
    no switchport 
    ip address 192.168.1.2 255.255.255.0 
    negotiation auto
    interface GigabitEthernet0/1 
    switchport access vlan 10 
    switchport mode access 
    negotiation auto
    interface GigabitEtherneto/2 
    switchport access vlan 10 
    switchport mode access 
    negotiation auto