Ethernet has been using optical fiber for decades. The first standard was 10 Mbit/s FOIRL in 1987, the currently fastest PHYs run 400 Gbit/s, added in 2017. Fiber has become common in datacenters due to the frequency and reach limitations of copper cables - currently and probably permanently limited to 40 Gbit/s over only 30 m of twisted pair or just 10 Gbit/s over the full 100 m.

Depending on your requirements, you're probably looking for one of these:

 - 1000BASE-SX: 1 Gbit/s over up to 550 m of OM2 multi-mode fiber
 - 1000BASE-LX: 1 Gbit/s over up to 10 km of single-mode fiber
 - 10GBASE-SR: 10 Gbit/s over up to 400 m of OM4 MMF
 - 10GBASE-LR: 10 Gbit/s over up to 10 km of SMF

The required optical transceivers are usually SFP(+) modules plugged into your network hardware. External media converters are also available.

For a complete list of physical layer variants you can check [WP](https://en.wikipedia.org/wiki/Ethernet_physical_layer).