3
votes
Accepted
Changing ethernet wiring for Cisco pre-standard PoE
It's your network, do whatever compromise is required by you, your management, and their budget.
I agree with comment above: don't mess with hidden wire, do it close to the phone or in the patch ...
- 16.3k
2
votes
Firmware of Cisco Phone
You need to supply the phone with a config file over TFTP, either by providing the right options with DHCP, or by setting the TFTP alternate setting via the menu. This settings makes the phone ask for ...
- 2,269
2
votes
Changing ethernet wiring for Cisco pre-standard PoE
is it acceptable practice to change the wiring of my ethernet cables slightly
Don't mess with standard cabling. In the longer term you (or whoever replaces you) will regret the decision. While your ...
- 27.4k
2
votes
How do I diagnose a VoIP issue on a Cisco 2811?
for me it sounds like problem in CALL HUNTING configuration
you have two ephone-dn 's (4 & 22) with 2000 extension ,which will handle the incommoding calls, where 4 with preference 0 and 22 with ...
- 3,454
2
votes
Smart switching calls in a company phone calls
Typically in order to handle this type of scenario, you need to add an ACD (Automatic Call Distribution) component to your telephony solution, and tie it into your CRM.
The idea is that your CRM tool ...
- 2,449
2
votes
Accepted
Cisco IP phone issue
It's just a guess, but sounds like dirt/corrosion in the network socket. Do you get any networking from bad phone at all? Can you plug something in on the "access" ether socket (ie the socket for the ...
- 16.3k
1
vote
IP_PHONE_POWER_ADAPTER IN CISCO PACKET TRACER FOR MAC
There shouldn't be any problem with attaching this but pay attention to "detail" as you need to lineup the plug to the inlet on the phone.
- 463
1
vote
"Protocol Application Invalid" in CISCO IP PHONE 7940!
The 7940 IP phone fails to perform the boot process correctly this problem could be
When you examine the sniffer trace between the DHCP server and the phone, you can identify that the phone accepts ...
- 3,454
1
vote
Call is disconnected after huntstopped to another phone
huntstop channel is missing from x2002.
- 4,409
Only top scored, non community-wiki answers of a minimum length are eligible