1

Just found a workaround. You can link the status of the DHCP server to a HSRP name: interface GigabitEthernet1 ip address 172.16.220.3 255.255.255.0 standby 10 ip 172.16.220.1 standby 10 priority 70 standby 10 preempt standby 10 name LAN ip dhcp pool LAN network 172.16.220.0 255.255.255.0 default-router 172.16.220.1 dns-server 8.8.8.8 8.8.4.4 ...


1

I found a fix for this. The trick is not to put the read community in the command. So we deployed this to all the IOS and IOS-XE switches and it works for all Vlans: snmp-server group COMPANY v3 priv context vlan- match prefix There was a strange timing issue within prime as well that made it difficult to verify the configuration.


Only top voted, non community-wiki answers of a minimum length are eligible