Hot answers tagged

4 votes

Testing Secondary Static Route

If all you're looking for is a way to make sure the new connection can pass traffic, you can add a route for something specific that won't interfere with your normal traffic, such as: ip route 8.8.8.8 ...
user avatar
  • 4,661
3 votes
Accepted

Testing Secondary Static Route

Can I add a static route Cisco3750Stack#ip route 0.0.0.0 0.0.0.0 10.6.0.1 10 to the existing static route and be able to test connectivity with the new IP scheme...? No, you can't. As others have ...
user avatar
  • 63k
3 votes
Accepted

What are the commands to configure static routes using next-hop IP addresses?

On R1: ip route 10.1.3.0 255.255.255.0 10.1.2.2 On R2: ip route 10.1.1.0 255.255.255.0 10.1.2.1
user avatar
  • 4,661
2 votes
Accepted

Trying To connect Router4 to internet

Let us from outside and work to towards inside : ISP - Who will need to create an acl for the networks that will be xlate using the below line ip nat inside source list 1 interface GigabitEthernet0/0 ...
user avatar
1 vote
Accepted

Static route removes another static route

#set protocol static route 192.168.10.0/24 next-hop 10.0.0.50 That can't work. 10.0.0.50 isn't connected to R1. Possibly, it just falls back that route to the default route - what exactly happens ...
user avatar
  • 71.5k
1 vote
Accepted

Ping ICMP is always sent to the same PC via switch from router

192.168.1.0/24 via 192.168.3.2 That's why. Router 2 uses 192.168.3.2 as a gateway to 192.168.1.0/24, including 192.168.1.2. The router doesn't know (nor care) that there's no gateway behind that IP ...
user avatar
  • 71.5k

Only top scored, non community-wiki answers of a minimum length are eligible