Timeline for IPv6 RAs on Cisco 4500 switch
Current License: CC BY-SA 3.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Oct 14, 2014 at 14:30 | comment | added | seven-down | Hi, i am testing this on a 4506 with 12.2 54 SG, but some commands are not available (ipv6 nd ra enable for instance). Also i don't have access to ipv6 command on physical interface... Any idea where that can come from ? Thanks | |
| Oct 10, 2014 at 7:40 | vote | accept | seven-down | ||
| Oct 9, 2014 at 16:36 | comment | added | Jaxxs | Gotcha. With the early hour here in san jose and the fact I haven't had my second cup of coffee at the time, I wasn't sure what you were asking lol. But yeah, should work fine. Just make sure you configure the RA from the actual VLAN interface, you can then advertise which prefix you want. (config) #interface vlan 300 (config-subif)#ipv6 address xxxxxxxxxxxxxx (config-subif)#ipv6 nd ra enable (config-subif)#ipv6 nd ra prefix X:X:X:X::X/64 | |
| Oct 9, 2014 at 13:49 | comment | added | seven-down | Sorry, I was speaking of the 4500 (I edited the question above...). Ok, then I should be able to make it work. But to complete my question and check that we are speaking of the same thing: I would like that the 4500 sends RAs containing the prefix of the IPv6 defined on each VLANs. I have the feeling that you are speaking of the autoconfiguration from the hosts point of view. | |
| Oct 9, 2014 at 13:37 | history | answered | Jaxxs | CC BY-SA 3.0 |