Timeline for How to use secondary internet exclusively for one host?
Current License: CC BY-SA 3.0
16 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 11, 2017 at 16:34 | comment | added | Ron Maupin♦ | Did any answer help you? If so, you should accept the answer so that the question doesn't keep popping up forever, looking for an answer. Alternatively, you could provide and accept your own answer. | |
| Jun 19, 2015 at 16:52 | comment | added | Ronnie Smith | If you could update the diagram with IP addresses of all networking devices shown it would help. | |
| May 20, 2015 at 12:42 | comment | added | feligiotti | that's look correct to me. But if you can access the Router 2851, you can try the bottom configuration | |
| May 20, 2015 at 11:05 | history | rollback | Mike Pennington |
Rollback to Revision 2
|
|
| May 20, 2015 at 11:04 | history | rollback | Mike Pennington |
Rollback to Revision 1
|
|
| May 20, 2015 at 11:02 | answer | added | feligiotti | timeline score: 4 | |
| May 20, 2015 at 9:46 | comment | added | Cragmuer | If I do manage to get access to the server to edit the routing table, what routes would I need to add for the 2851? Specifically, what would the routing table look like? route 1 (default) 0.0.0.0 0.0.0.0 192.168.0.7 and then would I need to add a route to each separate office using the 2851 as the gateway? So the other routes for each office would look like, route 2 192.168.1.0 255.255.255.0 192.168.0.1 and route 3 192.168.2.0 255.255.255.0 192.168.0.1 and route 4 192.168.3.0 255.255.255.0 192.168.0.1? However chances are that I'll never get the access needed on the server. | |
| May 20, 2015 at 9:37 | comment | added | Cragmuer | Thanks for your help gio900, it's much appreciated! Unfortunately I cannot edit anything beyond the basic network settings of the server. I've asked the vendor but they won't allow it. The diagram you've added (thanks BTW) is correct. The routing table on the 2851, besides the routes for my other offices, only has one default route "0.0.0.0 0.0.0.0 192.168.0.5" which sends all internet traffic on the 192.168.0.0/24 network to the primary ASA.5. | |
| S May 20, 2015 at 2:24 | history | suggested | feligiotti | CC BY-SA 3.0 |
logical connection image
|
| May 19, 2015 at 15:29 | comment | added | feligiotti | premise, no expirience on ASA, so that's just a question: if you connect the server "directly" to ASA.7 is possible to configure it to route internal traffic to 2851, then the exernal via ISP? | |
| May 19, 2015 at 14:36 | comment | added | feligiotti | I add an image to explain the situation. Please check if correct. In my opinion the simplest solution is to manipulate the routing table of the server (def gateway ASA.5, internal route to 2851. But... if you can't do it... | |
| May 19, 2015 at 14:17 | review | Suggested edits | |||
| S May 20, 2015 at 2:24 | |||||
| May 18, 2015 at 9:15 | comment | added | Cragmuer | Sorry I should have been a little more clear. All hosts on the 192.168.0.0/24 network use the 2851 (192.168.0.1) as their gateway, so I also need the server (192.168.0.100) to use the 2851 as it's gateway too. Because if I don't, I would then lose all access to my other offices. So somehow I need the 2851 to send all internet packets coming from the server (192.168.0.100) to the secondary ASA (192.168.0.7) instead of the primary ASA. It goes to the primary ASA right now because the 2851 has a default route (0.0.0;0 0.0.0.0 192.168.0.5) sending all internet requests to the primary ASA. | |
| May 15, 2015 at 9:45 | comment | added | feligiotti | maybe I didn't understand correctly: You want the server have 192.168.0.7 as default gateway, but between it and the server there is the ISR 2851? | |
| May 14, 2015 at 6:36 | review | First posts | |||
| May 14, 2015 at 20:59 | |||||
| May 14, 2015 at 6:34 | history | asked | Cragmuer | CC BY-SA 3.0 |