Timeline for How can I bridge multiple interfaces to a single one a Cisco ISR C891F but making each one able to communicate only to the destination interface?
Current License: CC BY-SA 3.0
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 24, 2017 at 17:00 | comment | added | Ron Maupin♦ | I know that many of the switch modules in the routers do not support things like ether-channel, or other features that you may expect stand-alone switches to support. You may need to get a stand-alone switch to do this. | |
| May 24, 2017 at 16:53 | comment | added | user34559 |
Apparently private-vlan is not supported as it says Invalid input detected :(
|
|
| May 24, 2017 at 16:46 | comment | added | Ron Maupin♦ |
@GamerJota, also be sure to read the limitations. For example, you will need to disable VTP, DTP, etc.. Did you create the VLANs as private VLANs, e.g. private-vlan isolated?
|
|
| May 24, 2017 at 16:44 | comment | added | user34559 | Yes, I currently have two VLANs. | |
| May 24, 2017 at 16:43 | comment | added | Ron Maupin♦ | Unfortunately, that is the Cisco solution. Did you create the private VLAN first? You must set up the VLANs before you can assign the interfaces. | |
| May 24, 2017 at 16:41 | comment | added | user34559 | Just tested it and I'm afraid "switchport mode private-vlan" is not available on my router, do you know another possible solution? | |
| May 24, 2017 at 16:26 | vote | accept | CommunityBot | ||
| May 24, 2017 at 16:21 | history | answered | Ron Maupin♦ | CC BY-SA 3.0 |