Timeline for Juniper EX2300 QinQ questions
Current License: CC BY-SA 4.0
8 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 18, 2019 at 14:27 | comment | added | Jordan Head | Your interface (ge-0/0/0) should not need a family to be configured to do QinQ. If you don't see a family configured under unit 3251, it's likely that an apply-group is the culprit. Can you paste the output of "show configuration vlans" and "show configuration interfaces ge-0/0/0 | display inheritance"? | |
| Nov 18, 2019 at 7:08 | comment | added | Lyj | @JordanHead After I upgrade to version 18.1R3 I can delete the unit 0. Thanks for helping. However it shows another message 'unit 3251' interface needs to be in a bridge-domain or evpn to support family bridge | |
| Nov 12, 2019 at 17:10 | comment | added | Jordan Head | Can you paste the error you see when trying to delete unit 0? Unit 0 is definitely not required to be there unless something else in your configuration is referencing it. | |
| Nov 7, 2019 at 6:00 | comment | added | Lyj | No, but unit 0 can not be delete or not to config. | |
| Nov 7, 2019 at 5:10 | comment | added | joshmatt | Do you require having unit 0 defined at all for ge-0/0/0? | |
| Nov 7, 2019 at 2:12 | comment | added | Lyj | Thanks for your reply. After I add a vlan-id which match with my native vlan I still get error message down below. [edit interfaces ge-0/0/0] 'unit 0' interface needs to be in a bridge-domain or evpn to support family bridge So I search about this message and I consider that I do not need the irb for CVLAN port cause ip address is unnecessary. Therefore, I tried to set "encapsulation vlan-bridge" for my unit 0 and it gets another error message. "Link encapsulation type is not valid for device type" | |
| Nov 6, 2019 at 12:50 | review | First posts | |||
| Nov 6, 2019 at 14:28 | |||||
| Nov 6, 2019 at 12:48 | history | answered | joshmatt | CC BY-SA 4.0 |