In my Juniper MX480, the logic-systems config is below:

logical-systems {
    r1 {
        interfaces {
            ge-0/0/0 {
                unit 0 {
                    family inet {
                        address 10.1.1.1/24;
                    }
                }
            }
        }
    }                                   
    r2 {
        interfaces {
            ge-0/0/1 {
                unit 0 {
                    family inet {
                        address 10.1.1.2/24;
                    }
                }
            }
        }
    }
}

I have several questions about logic-systems:

1.whether I can regard the mx480 as two independent routers?
2.but you know they're only one config file(I am editing), whether the r1 and r2 use the same config file? if is, why they're set two instances, use one and use two they are take same function?

In my Juniper MX480, the logic-systems config is below:

[edit]
logical-systems {
    r1 {
        interfaces {
            ge-0/0/0 {
                unit 0 {
                    family inet {
                        address 10.1.1.1/24;
                    }
                }
            }
        }
    }                                   
    r2 {
        interfaces {
            ge-0/0/1 {
                unit 0 {
                    family inet {
                        address 10.1.1.2/24;
                    }
                }
            }
        }
    }
}

I have several questions about logic-systems:

1.whether I can regard the mx480 as two independent routers?
2.but you know they're only one config file(I am editing), whether the r1 and r2 use the same config file? if is, why they're set two instances, use one and use two they are take same function?

In my Juniper MX480, the logic-systems config is below:

I have several questions about logic-systems:

1.whether I can regard the mx480 as two independent routers?
2.but you know they're only one config file(I am editing), whether the r1 and r2 use the same config file? if is, why they're set two instances, use one and use two they are take same function?

In my Juniper MX480, the logic-systems config is below:

logical-systems {
    r1 {
        interfaces {
            ge-0/0/0 {
                unit 0 {
                    family inet {
                        address 10.1.1.1/24;
                    }
                }
            }
        }
    }                                   
    r2 {
        interfaces {
            ge-0/0/1 {
                unit 0 {
                    family inet {
                        address 10.1.1.2/24;
                    }
                }
            }
        }
    }
}

I have several questions about logic-systems:

1.whether I can regard the mx480 as two independent routers?
2.but you know they're only one config file(I am editing), whether the r1 and r2 use the same config file? if is, why they're set two instances, use one and use two they are take same function?