Timeline for SoniWall DHCPD does not allocate subnet addresses
Current License: CC BY-SA 3.0
7 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 13, 2016 at 20:11 | vote | accept | jmurray | ||
| Feb 13, 2016 at 18:11 | answer | added | RobinG | timeline score: 1 | |
| Feb 13, 2016 at 17:43 | comment | added | jmurray | If I create a static dhcp scope in the 192. subnet (e.g. 192.168.1.77), then the phone picks up a static 192.x address. However, when I disable the 192.x static dhcp scope and configure the 10.100.10.82 static scope, the DHCP server only responds with the dynamic 192.x address (if the dynamic 192.x range is configured) or with nothing (if no dynamic range for 192.x is configured. | |
| Feb 13, 2016 at 17:36 | comment | added | jmurray | The unmanaged switch is a netgear 16 port FS 116. The DCHP request is sent by the phone which I can see on the phone's LAN. The sonicwall responds with a DHCP address of 192.168.1.130, from its pool of dynamic addresses. I see the DHCP response with the .130 address on the phone lan. I don't have a wireshark on the Router's lan, but I do see a request and response on the phone lan. As the DHCP flow is a lower 2 flow, I am not sure why a switch would strip of a VLAN tag from inside the DHCP option. What would you suggest? | |
| Feb 13, 2016 at 17:12 | comment | added | RobinG | What is the brand/type of the unmanaged switch? Most likely it's stripping of the VLAN tags, so all your devices are connected to X0 rather than X0:V10. | |
| Feb 13, 2016 at 14:34 | review | First posts | |||
| Feb 13, 2016 at 18:51 | |||||
| Feb 13, 2016 at 14:30 | history | asked | jmurray | CC BY-SA 3.0 |